|
Open the bonnet,
identify where you would check the engine coolant level and tell
me how you would check the engine has the correct level.
Identify the coolant tank and check the min/max markings.
If the coolant is below the min mark then more coolant will need
to be added. To do this, unscrew the cap and pour in coolant
until the max mark is reached.
Open the bonnet, identify where the
brake fluid reservoir is and tell me how you would check that
you have a safe level of hydraulic brake fluid.
Identify the brake fluid reservoir and check the fluid
level against the min/max levels.
Show me/explain how you would check
that the power assisted steering is working before starting a
journey.
If the steering becomes heavy the steering may be faulty.
Before starting a journey two simple checks can be made. 1)
Gentle pressure on the steering wheel, maintained whilst the
engine is started, should result in slight but noticeable
movement as the system begins to operate. 2) Turning the
steering wheel after just moving off will give an immediate
indication that the power assisted steering is functioning
correctly.
Identify where the windscreen washer
reservoir is and tell me how you would check the windscreen
washer level.
Identify the reservoir and explain how to check the level.
Open the bonnet identify, where you
would check the engine oil level and tell me how you would check
that the engine has enough oil.
Identify the dipstick, pull it out and check the oil level
against the min/max markings.
Show me how you would check that the
horn is working (off road only).
Press the horn and listen (turn on ignition if necessary).
Show me how you would check that the
brake lights are working on this car. (I can assist you, if you
need to switch the ignition on, please don't start the engine).
Operate brake pedal, make use of reflections in windows,
garage doors, etc, or ask someone to help. (may need to switch
ignition on, prompt not to start engine)
Tell me how you would check that the
brakes are working before starting a journey.
As you move off check the brakes. They should not feel
spongy and the car should not pull to one side.
Tell me how you would check that the
headlights and tail lights are working.
Turn on lights (turn ignition if necessary), walk around
car and check that the lights are on.
Show me how you would check that the
direction indicators are working correctly.
Activate the indicators or hazard warning lights and walk
around the car to see if all the indicators are working
correctly.
Tell me where you would find the
information for the recommended tyre pressures for this car and
how tyre pressures should be checked.
Information will be found using the car manufacturer's
manual. Check the tyre pressures by using a reliable pressure
gauge when the tyres are cold. Don't forget the spare and
remember to refit the valve caps.
Tell me how you would check the tyres
to show that they have sufficient tread depth and that their
general condition is safe to use on the road.
A safe tyre will have no cuts or bulges. The tread depth
should be at least 1.6mm across the central 3/4s of the breadth
of the tyre and around the entire outer circumference.
Show me how you would check the parking
brake for excessive wear.
Apply the parking brake. When it is fully applied it
should secure itself.
Tell me how you make sure your head
restraint is correctly adjusted so it provides the best
protection in the event of a crash.
The head restraint should be adjusted so the rigid part of
the head restraint is at least as high as the eye or top of the
ears, and as close to the back of the head as is comfortable.
N.B. Some restraints might not be adjustable.
Show me how you would clean the
windscreen using the windscreen washer and wipers .
Operate control to wash and wipe windscreen (turn ignition
on if necessary.
Show me how you would set the demister
controls to clear all the windows effectively, this should
include both front and rear screens.
Set all relevant controls including; fan, temperature, air
direction / source and heated screen to clear windscreen and
windows. Engine does not have to be started for this
demonstration.
Tell me how you would know if there was
a problem with your anti lock braking system.
Warning light should illuminate if there is a fault with
the anti lock braking system.
Show me how you switch your headlight
from dipped to main beam and explain how you would know the main
beam is on whilst inside the car.
Operate switch (with ignition or engine on if necessary),
check with main beam warning light.
Show me how you would switch on the
rear fog lights and explain when you would use them. (No need to
exit vehicle).
Operate switch (turn on dipped headlights and ignition if
necessary). Check warning light is on. Explain use.
Note: Failure on one or
both of the show me tell me questions will result in one minor
fault.
|
